There are currently two types of gateway used with the system.
Manual System Gateway
-
designed to be deployed in a lubrication workshop ideally in the vicinity of the charging location of the head unit between uses.
-
Once installed is only power dependant
-
Internet connection can be via onboard LTE, site Wi-Fi or site LAN cable (fully secured and configurable)
-
GB can remote assist as required
-
determine a suitable location where both the gateway and the head unit will be stored between uses (on charge and synchronisation)
-
Route an external antenna for LTE signal if required - alternatively can be configured for Wi-Fi or LAN cable internet connectivity
-
Provide power (ensure remains ON) and verify a full synchronisation can occur.
Automatic System Gateway
-
Designed for outdoor deployment and only intended as a gateway for endpoint devices
-
Ideally located centrally among a cluster of endpoints (range up to 150m in some cases)
-
Can be pole or surface mounted
-
Once installed permanent power is required
-
Internet connection can be via onboard LTE , site Wi-Fi or site LAN cable (fully secured and configurable)
-
Mount the gateway (pole or other)
-
Provide power ( via PoE injector or directly) and ensure it remains ON
-
Confirm endpoints can communicate ( range checks)