Skip to content
English
More support
Contact us
  • There are no suggestions because the search field is empty.

HME SYSTEM EXPLAINED

HME System Explained

The HME system is designed for use on Heavy Mobile Equipment.

Typically with the use of any of the following

  • The entire Endpoint family

  • one or more Greaseboss HME gateway

Safety

Follow all site policies and procedures.

Device overview

Endpoint LF / HF

  • Endpoint LF (low flow) and HF (high flow) are rugged, wireless, battery-powered flow meters that measure grease volume.

  • The Endpoint LF models install downstream of injectors and distributors to monitor critical points,

  • While the Endpoint HF model is designed for trunk line monitoring for less critical/more cost-effective injector bank monitoring and for use in high-viscosity fluids like open gear lubricants.

Endpoint BF

  • Endpoint Bulk Flow (BF) is a high-capacity monitoring device designed to track lube pump performance and grease tank filling.

  • It measures directional flow during both pressurisation and venting, capturing how much grease enters the system and how much returns via the dump valve.

  • This delivers visibility into auto lube pump function, full-system performance and remote grease tank fill level monitoring on critical assets.

Endpoint MP2

  • The Endpoint MP2 are rugged, wireless, battery-powered 2-port flow meters that measure grease volume aswell as hose pressure on two lines for each device.

HME Gateway

The HME gateway typically includes the following ( dependant on site / vehicle application )

  • Teltonika RUTX11 router - with LTE / WIFI / LAN capablilites

  • Externally mounted BT antennae

  • External mounted LTE antennae